Functions

Back to all Lessons

🎯 Learning Goals

• Be familiar with the syntax to write and call a function
• Explain the flow of arguments/variables through a function

📗 Technical Vocabulary

• Argument
• Call/Run
• Declare
• Function
• Parameter
• Return Value

🐣Warm Up

In your breakout groups, choose one application that you all like to use.

You will have one minute to click/tap through the application as you normally would while using it.

• Partner A should be the “user” - tapping, scrolling, etc.
• Partner B should be tallying the number of times the application DOES something (examples: load content, respond to a click/tap by showing a different screen or new content, etc.)

To build a mobile application, developers write A LOT of functions. Every time you click a button and see something happen, a function (or many functions) just performed its job. Every time you see new data load (your account page, someone else’s profile page, detail of an image, etc.), a function just performed its job.

As we start learning about functions today, we won’t be writing ones quite as involved as some that are powering your favorite apps - but we will begin to understand the foundations!

🌎 What is a Function?

A function is an action in our code. It has a specific job, and it sits around waiting to be asked to perform it. It can do this job as many or as few times as we tell it to. A function can have a very small job (add two numbers together) or a very big job (find the standard deviation of 1 million numbers). We get to write them, so we have control over what each function does!

In our class example today, we will write instructions for a robot to walk a dog.

Declare a Function

Here’s what a very basic function declaration looks like:

func walkDog() {
  // code goes here
}

We start with the key word func, then name our function whatever we want. The name should describe the type of action our function is taking. Like variables, we use camelCase.

Directly after the function name, we see open and close parentheses, then open and close curly brackets. The directions we want our function to take will live inside the curly braces. We can give a function as many directions as we’d like!

Let’s add some of the steps our robot needs to take to walk a dog. For now, we will use print() to print out the steps, so we know when our function is working.

func walkDog() {
  print("Put on leash")
  print("Put treats in pocket")
  print("Put poop bag in pocket")
}

Now, this code alone won’t do anything. We have declared the function - told it what its job is. But we haven’t called the function - or told it to carry out its job.

Call a Function

We have a really nice function written, but we need to call it for it to run. The great thing about functions is you can decide when they do their job. Maybe we only want one certain function to run when a user interacts with our site in a specific way. This puts us in complete control.

func walkDog() {
  print("Put on leash")
  print("Put treats in pocket")
  print("Put poop bag in pocket")
}

walkDog()

The last line of the code snippet is what calls the function. If we run this code in a repl.it file, we should see each step printed out.

Arguments and Parameters

If we are really going to have this robot help out, we need it to be a little ‘smarter’. We need it to know that if there are two dogs, it needs to put two leashes on, bring two poops bags, etc.

We can make functions a little ‘smarter’ with something called an argument and a parameter. Check out the code below, and then we’ll talk about what is happening:

func walkDog(numberOfDogs : Int) {
  print("There are \(numberOfDogs) dogs in the house")
}

walkDog(numberOfDogs : 2)
//=> Put on 2 leashes
//=> Put 2 treats in pocket
//=> Put 2 poop bags in pocket

walkDog(numberOfDogs : 7)
//=> Put on 7 leashes
//=> Put 7 treats in pocket
//=> Put 7 poop bags in pocket

To allow our functions to be more dynamic or work in more situations, we can write the declaration with parameters. The parameter(s) live inside the parenthesis right after the function name. If there are more than one, they should be separated by a comma and a space.

When we call the function, it will now be expecting an argument. The argument is the value(s) you want to store to the parameter variable(s).

In our example above, walkDog(numberOfDogs: 2) was called. 2 was the argument that was passed in. So, the parameter numberOfDogs is now a variable that holds the value of 2. Anytime numberOfDogs is referenced inside of this function for this one specific time it’s being run it will point to the value of 2.

Below, walkDog(numberOfDogs: 7) was called. Anytime numberOfDogs is referenced inside of this function for this one time its being run it will point to the value of 7.

Using Parameters Like Variables

We can also do some calculations with our parameters, just like we’ve done with variables. Let’s say we want to set an expectation that the robot walks each dog for 15 minutes. We can use the parameter to tailor the total number of minutes walked for each walk.

func timeToWalk(numberOfDogs : Int) {
  var totalMinutes = numberOfDogs * 15
  print("You should walk a total of \(totalMinutes) minutes.")
}

Return Values

Up until now, inside our functions, we’ve only called print on values - in the future, we will need our functions to return values so we can use them elsewhere. This may not completely make sense now, but in the next couple of lessons, all the pieces will tie together. It’s good to get some exposure to it today.

func timeToWalk(numberOfDogs : Int) -> Int {
  var totalMinutes = numberOfDogs * 15
  return totalMinutes
}

In this function, we are not calling print, so when we call it, we won’t see an output in the console.

func timeToWalk(numberOfDogs : Int) -> Int {
  var totalMinutes = numberOfDogs * 15
  return totalMinutes
}

var minutes = timeToWalk(numberOfDogs : 3)
print("You should walk a total of \(minutes) minutes.")
//=> You should walk a total of 3 minutes.

Important things to know about returning a value:

• We must indicate that we want to return a value in two different places in the function declaration:
  1. After the parenthesis where we declare any parameters, we must include -> DATA TYPE TO BE RETURNED
  2. The last line of the function must use the return keyword, and the data we want to return should follow it
• Each function can only return one value
• Once the program reads the return keyword and the rest of the code on that line, it will exit that function. So, any code written on a line after the return statement will never be executed.

Takeaways:

• func timeToWalk(numberOfDogs : Int) -> Int { declares the function
• (numberOfDogs : Int) states that we plan to get one piece of data when this function is called. It must be an Integer returned when we call numberOfDogs
• -> Int declares that we plan to return an Integer out of this function
• var totalMinutes = numberOfDogs * 15; declares a new variable that stores the result of 15 multiplied by the number passed into the function
• return totalMinutes; returns the value of the totalMinutes variable
• var minutes = timeToWalk(numberOfDogs : 3); calls the function timeToWalk and passes in 3 as the argument. The return value of that is stored in the new variable minutes

Incorporating Conditionals

If we were only walking 1 dog, the sentences would read incorrectly, for example, “put on 1 leashes”. Let’s write a conditional inside the function; if the numberOfDogs passed in is 1, we will print out one set of directions, and if it is greater than 1, we will print out another set.

func walkDog(numberOfDogs : Int) {
  if numberOfDogs == 1 {
    print("Put on \(numberOfDogs) leash")
    print("Put \(numberOfDogs) treat in pocket")
    print("Put \(numberOfDogs) poop bag in pocket")
  } else {    
    print("Put on \(numberOfDogs) leashes")
    print("Put \(numberOfDogs) treats in pocket")
    print("Put \(numberOfDogs) poop bags in pocket")
  }
}

Functions

Throughout camp, we will write a lot of functions! They will have different jobs, and some will look quite different from ours today, but you’ve got a great foundation. Get a little more practice by completing the task below.

Back to all Lessons